Pending Edits to 3. Head Box and Neck Assembly
Step #7 edited: [Step edited]
Edited by Jorick Bouw (1)
(You don’t have enough reputation to patrol this edit.)
| [title] Attach ServoCouple to Servo | |
| - | [* 1] Once the epoxy has dried, remove the HeadBar, and remove the |
| + | [* 1] Once the epoxy has dried, remove the HeadBar, and remove the ServoCouple with the now epoxied on servo horn. You will use the servo center screw that came with the servo and a M3 Square Nut. |
| [* 1] Insert the M3 Square Nut into the ServoCouple as shown in Pic 2. If it is loose, you can use some hot glue to hold it in place. | |
| [* 1] Place the ServoCouple with horn onto the servo in the same orientation of the previous step that you epoxied it on as. | |
| [* 1] Using the center screw that came with the servo, Install the servo horn onto the servo through the hole for the HeadBar as shown in Pic 3. |